M-18PD-YM
TOOL BATTERY
POWER ADAPTER
For selected Milwaukee M18 batteries
USB-C & DC up to 100W input/output. Built-in MPPT solar charging.
- USB-C up to 100WBidirectional input / output
- DC up to 100WBidirectional DC5521 · MPPT tracking efficiency up to 99%
- USB-A up to 15WAdditional device output
- 2W LEDIntegrated front lighting
Dedicated Milwaukee base version. Final pack compatibility is confirmed by model, not by brand name alone.
A DEDICATED BATTERY BASE
CHECK THE BASE
CONFIRM THE FIT
M-18PD-YM is the Yumeng version for selected Milwaukee battery configurations. Share the full battery model or a clear label photo before confirming your order.
Ask about battery matching
MAXIMUM POWER POINT TRACKING
MPPT SOLAR
RECHARGE YOUR
TOOL BATTERY
Add solar recharging to your tool battery accessory range. Feed a suitable panel into the DC5521 input with M-18PD-YM to charge the attached compatible battery.
Built-in MPPT adjusts the panel’s operating point as sunlight changes, with tracking efficiency up to 99%. It tracks the maximum power point to support solar charging of the matching tool battery.
- Suitable solar panel
Supplies solar energy.
- DC5521 input + MPPT
Tracks the panel operating point.
- Matched tool battery
Receives and stores the energy.
DC5521 supports input and output up to 100W. Up to 99% refers to MPPT tracking efficiency; actual solar charging power depends on the panel, sunlight and battery. Recommended panel operating voltage: around 18V.
POWER OUT
CHARGE BACK
USB-C and DC5521 each work in two directions, up to 100W per port. Use stored battery energy for compatible equipment, or connect a suitable power source to recharge the matching battery.
Tool battery → USB-C device
USB-C up to 100W for compatible devices and the agreed battery configuration.
USB-C PD source → tool battery
Recharge the attached battery from a suitable USB-C PD source.
The round DC5521 port also supports input and output up to 100W.
USB-A up to 15W
A separate output for compatible everyday devices and accessories.
2W LED lighting
Integrated front lighting for close-up work and everyday backup.
100W USB-C operation requires a compatible battery, connected equipment and a 5A e-marked USB-C cable. Actual power depends on the equipment and operating conditions. Input and output paths are shown separately
FIVE BUILT-IN
PROTECTION FUNCTIONS
Protection functions are part of the adapter specification. Match the battery, power source and operating conditions to the confirmed product configuration.
Overcharge protection
Charging-related protection.
Overdischarge protection
Protection against excessive battery discharge.
Overcurrent protection
Protection for abnormal current conditions.
Overtemperature protection
Temperature-related protection.
Short-circuit protection
Protection for short-circuit conditions.
TECHNICAL DETAILS
KNOW
THE DETAILS
Product specifications and battery platform references are shown below
Ask a technical question| Yumeng model | M-18PD-YM |
|---|---|
| USB-C input / output | 5V/3A · 9V/3A · 12V/3A 15V/3A · 20V/5A USB-C up to 100W |
| USB-A output | 5V/2.4A · 5V/3A Up to 15W |
| DC5521 input / output | DC up to 100W Bidirectional input / output Built-in MPPT solar charging |
| MPPT tracking efficiency | Up to 99% Recommended panel operating voltage: around 18V |
| LED lighting | 2W |
| Protection functions | Overcharge · Overdischarge · Overcurrent · Overtemperature · Short-circuit |
| Battery platform and models | Milwaukee M18 View 25 model referencesUS models
Europe and UK models
M18 only Excludes M12 MX FUEL and V18 Platform references only Confirm fit USB power and each recharge mode before ordering Confirm your battery model |
| Product dimensions / net weight | 107 × 69 × 45 mm Net weight: 83.4 g |
| Packaging dimensions | 148 × 135 × 50 mm |
| Battery included | No. Adapter only. Matching batteries can be quoted separately. |
M-18PD-YM · WHOLESALE & CUSTOMIZATION
READY FOR
YOUR PRODUCT RANGE
Order the existing version or create your own presentation with color, logo, packaging and manual customization. Bring battery-interface or function requirements for engineering review.
Explore our cooperation processIncluded in the quotation
Adapter model and confirmed configuration with accessories agreed in the quotation
Need matching batteries?
Matching battery supply and customization can be quoted separately. The adapter itself does not include a battery.
Samples & bulk orders
Sampling: around 10 days, subject to scope. MOQ depends on customization. Production lead time is confirmed for each order.
Know what you are ordering.
Confirm battery fit, the sample configuration, included items and written after-sales terms before the order.
See cooperation & after-sales detailsOnline 18 hours daily
Reply within 6 hours
BEFORE WE BEGIN
YOUR QUESTIONS
ANSWERED
Does one adapter fit all four battery platforms?
Are all Milwaukee batteries automatically compatible?
Is a battery included?
What does MPPT do?
What is needed for USB-C up to 100W?
Can you make a product for our brand?
What are the MOQ and delivery arrangements?
What warranty applies?
WHOLESALE · PRIVATE LABEL · DEVELOPMENT
REQUEST YOUR
ADAPTER QUOTE
Send your battery model, estimated quantity and customization needs. Estimates are welcome.